no problem thanks for reply
yes i have checked with Osiliscope every thing is fine, but when i am feeding back this signal on AI0(analog input) to get waveform back in the VI it skips the cycles. what i got is that there is some problem with acquisition not with generation because on Osiliscope it is working fine but feeding back to Labview gives me problem ..
looking forward
problem digital pulse aquasition with NI USB 6008
-
- beginner
- Сообщения: 10
- Зарегистрирован: 26 мар 2009, 19:03
- Версия LabVIEW: 8.6
- Контактная информация:
-
Konstantin Sumenko
- expert
- Сообщения: 1439
- Зарегистрирован: 17 июл 2008, 12:20
- Награды: 2
- Версия LabVIEW: 2010
- Откуда: Moscow
- Поблагодарили: 1 раз
- Контактная информация:
Re: problem digital pulse aquasition with NI USB 6008
Try using continious acquisition, instead of reading N samples (in this mode you have delay which is equal to F descetisation / N samples to read). When using continious data acquisition pay special attention to input data Buffer filling.
-
- beginner
- Сообщения: 10
- Зарегистрирован: 26 мар 2009, 19:03
- Версия LabVIEW: 8.6
- Контактная информация:
Re: problem digital pulse aquasition with NI USB 6008
i have tried with continues sampling infect i am using Continues sampling from the bigening , then i tried with getting N samples but still i got the same problem .
-
- Похожие темы
- Ответы
- Просмотры
- Последнее сообщение
-
- 0 Ответы
- 344 Просмотры
-
Последнее сообщение maxim_MA
-
- 4 Ответы
- 621 Просмотры
-
Последнее сообщение Borjomy_1
-
- 4 Ответы
- 482 Просмотры
-
Последнее сообщение Eugene543210
-
- 4 Ответы
- 243 Просмотры
-
Последнее сообщение Embedder74